BELTON, TEXAS • BELL COUNTY
Concrete Patios in Belton, TX
Custom backyard patios, covered patio slabs, and outdoor living foundations for Belton homes — clean finishes, honest pricing, and a real timeline.
Belton concrete patio contractor
Concrete Patios in Belton, TX
A patio is where a Belton backyard actually becomes usable. We pour open patios, slabs sized for a cover or pergola, outdoor kitchen pads, fire-pit surrounds, and walkways that tie the whole yard together.
We size and slope every Belton patio so water runs away from your foundation, not toward it — that single detail causes more callbacks for other contractors in Bell County than anything else. Then we detail the edges and joints so the slab looks intentional instead of poured-and-forgotten.
Broom finish is the workhorse and holds up beautifully to Texas UV. We also pour salt finish and exposed aggregate when the architecture calls for it, and we can stain or seal after the slab has cured.
How we build it
- Typical thickness: 4" with thickened edges
- Reinforcement: #3 rebar grid or fiber-reinforced mix
- Slope: 1/8"–1/4" per foot away from the house
- Finish options: Broom · salt finish · exposed aggregate
- Add-ons: Cover-ready footings, outdoor kitchen pad, seat wall
Belton areas we pour
- Downtown Belton
- Lakewood Ridge
- Three Creeks
- Mill Creek Springs
- Heritage Place
- Lakewood Estates
- Sparta Road corridor
- Belton Lake side
- Leon Heights
- South Belton / Loop 121
- Stillhouse Hollow side
- Miller Heights
ZIP codes: 76513
Recent Belton work
Local jobs. Local references.
Three Creeks
Driveway extension and side parking pad
5" thick, broom finish, saw-cut control joints
Lakewood Ridge
Covered patio slab with cover-ready footings
Broom finish, thickened edges, sloped for drainage
Mill Creek Springs
30' x 30' shop slab
6" thick, #4 rebar 16" OC, broom finish
Belton Lake side
RV pad with approach drive
6" thick, reinforced edges, broom finish
Belton concrete patio FAQ
Straight answers. No runaround.
How much does a concrete patio cost in Belton, TX?
Most Belton patios land between $9 and $16 per square foot installed depending on finish, thickness, and site access. A simple broom-finish rectangle sits at the low end; a shaped patio with a seat wall and outdoor kitchen pad sits higher.
What size patio should I build?
For a table and chairs, plan on at least 12' x 14'. If you want a seating area plus a grill or outdoor kitchen, 16' x 20' and up is more comfortable. We'll stake it out on site so you can stand in it before you decide.
Can you pour a slab ready for a patio cover?
Yes. If you're adding a cover or pergola now or later, we pour thickened edges and set footings in the right spots so you're not drilling into a finished slab down the road.
Do you pour simple concrete patios?
Yes — we focus on clean, durable broom, salt, and exposed-aggregate finishes that hold up long-term in Belton's heat and freeze-thaw cycles.
Free Belton estimate
Ready for concrete patios in Belton?
Send us the details and we'll respond within 24 hours with honest answers, transparent pricing, and a clear timeline.
More Belton concrete services
Concrete Patios in nearby cities